|Model:||KSJ-1.5S||Motor Power:||1.5 KW|
|Power Supply:||3x380V/50Hz Or 3*220V/60Hz||Efficiency:||99.9%|
|Application:||Industrial Dust Removal||Type:||Cartridge Filter Dust Collector,Portable Industrial Dust Collector|
|Warranty:||2 Years||After-sales Service Provided:||Free Parts,Online Support|
Cartridge Filter Industrial Fume Extractor,
1.5KW Industrial Fume Extractor,
PTFE Membrane Welding Fume Extractor
Cartridge Filter Industrial Dust Collector/Fume Extractor For Workstation Filter Units For Welding Station
The welding fume dust collector is a device that absorbs, absorbs and treats waste slag and toxic and harmful gases generated during welding, such as electric welding, protective welding and argon arc welding by means of filtration and purification. The welding smoke extractor can prevent gas pollution, reduce the harmful effects of harmful substances on the workers, and prevent occupational diseases, mainly electric welding pneumoconiosis.
Through the gravitational action of the fan, the welding fumes are sucked into the air inlet of the device through the universal suction hood, and a flame arrester is arranged at the air inlet, the spark arrester is blocked, and the soot gas enters the settling chamber.Using gravity and upward airflow, the coarse dust is first directly reduced to the ash bucket, and the particulate soot is trapped on the surface by the filter element. After the clean gas is filtered and purified by the filter element, the filter core flows into the clean room, and the clean air is adsorbed by the activated carbon filter. After further purification, it is discharged through the outlet.
fume extractor is suitable for manual welding and small workpiece welding. It also uses in simple laser welding, engraving and new material processing, ect. It is very flexible using in most working area, especially when the work position is very dispersive.
|1||Fan type||Centrifugal fan|
|2||Fan of air flow||3000±100m3/h|
|3||Treatment of air flow||1800±100m3/h|
|6||Filtration area||8 m2|
|7||Number of cartridges filter||1 piece|
|8||Filter medium||Imported PTFE membrane|
|11||Internal suction arm (1 piece)||2 mφ160mm|
|12||Weight(excluding suction arm)||120±10 kg|
|13||Dimensions(excluding suction arm)||550×550×1165mm|
1. Adopts high quality cold-rolled steel plate processing, key structural parts made by laser cutting and one shot punching forming.
2. Reasonable box structure, compact and practical.
3. A diversion device at the inlet to protect the filter from the damage of large particles.
4. Wide front door and the spiral tower buckle design makes check and replace the filter cartridge easily.
5. Filter adopts the high efficiency import PTFE coated polyester fiber, the filtration reach 99.9%.
6.Original import suction arm: The unique design of the suction hood captures more efficiently. One more joint design than the conventional suction arm allows the suction arm to reach any direction easily. The internal reinforced skeleton system is an aluminum component, which has been anodized, has superior load bearing and corrosion resistance, and has a longer service life.
Contact Person: Eric