|
Product Details:
|
| Model: | KSJ-0.7S | Power:: | 750W |
|---|---|---|---|
| Voltage:: | 220/ 50 Hz | Air Flow:: | 1000m3/h |
| Filter Precision:: | ＞0.5μm | Filtering Area:: | 15 M2 |
| Suction Arms:: | 2m, DN160, Plastic Or Stainless Steel Hood | Size:: | 510*610*990mm |
| Weight:: | 98±5Kgs | ||
| High Light: | welding smoke eater,industrial dust extractor |
||
portable fume extractor welding exhaust fume extractor with flexible suction arm
Product Introduction
1. Mobile welding fume extractor is suitable for the purification of fume and dust generated in
all kinds of welding, grinding and other places as well as for collecting rare metal particles
and precious material.
2. Suction arm can be rotated by 360 °and can reach the position flexibly and easily by pulling the handle on the hood and position in the absence of external force. Depending on needs, 2m, 3m flexible suction arm are available.Suction arm uses high temperature resistant, flame retardant and wearable composite material, it will not crack after burning through by spark and has a longer usage life.
3. The filter cartridge of the welding fume extractor is made of imported filtering material of high filtration precision and can filter out welding fume of 0.5μm. According to the extractor’s work intensity and the amount of dusts, the usage life of the filter cartridge is different.
01.High performance fan impeller
Self-developed high-performance Fan impeller. With high negative pressure and large air flow, could effectively deal with welding fume.
02.International Famous Brand Motors
Equipped with overload and over current protection
03.Special design of air duct adopts downflow baffle structure.
It is more reasonable , the loss of wind pressure is small and dust collection efficiency is high,no escape. Drawer-type dust collector is convenient and quick to clean dust.
Working principle:
Through the wind force of the fan, the dust is sucked into the air inlet of the equipment through the suction hose, then the dust is blocked at the air inlet, the large dust is blocked to the dust drawer. Small dust enter into the settlement room, take use of gravity and the upstream air, firstly make the coarse dust directly drop to the ash bucket, small dust particles were trapped in the outer surface of the filter. Clean air will be filtrate by Cartridge Filter, then enter into the clean room, exhaust outside after the outlet by the standard discharge;
Standard Parameters
| No. | Item | Parameter |
| 1 | Fan type | centrifugal fan |
| 2 | Treatment of air flow | 1000±100 m3/h |
| 3 | Motor power | 0.75kW |
| 4 | Power supply | 220/50Hz |
| 5 | Filtration area | 15 m2 |
| 6 | Number of filter cartridges | 1 piece |
| 7 | Filter medium | Synthetic wood pulp fiber filter paper |
| 8 | Filtration efficiency | >99.9% |
| 9 | Noise | ≤74±5dB(A) |
| 10 | Ash hopper volume | 2 L |
| 11 | One suction arm | Ø160mm*2m |
| 12 | Weight (excluding suction arm) | 98±5KG |
| 13 | Dimensions(excluding suction arm) | 510×610×990mm |
Contact Person: Mr. Jason
Tel: +86-21-57783800-8013
Fax: +86-21-57783801
