ODM/OEM service is available.
The fume will be sucked into the extractor through the exhaust hose. Firstly, the fume passes the diversion device which could ramify the fume to avoid residual sparks enter into the filter layer directly. Then, 99.99% of the welding fumes & smoke generated from hthe welding processes will be removed by the filter effectively. As the exhausted air could reach the indoor emission standard, the filtered clean air can be directly discharged indoor via the vent in the bottom of the extractor.
when the pressure reaches the specified value, you need to connect the machine to a compressed air by air inlet to clean the filter. Or you can also take out of filters from the front door, and clean it by using compressed air gun.
Our welding fume extractors are permanent or portable, cost efficient, easy to integrate and reliable with a 2 year warranty.
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||1000±100 m3/h|
|4||Power supply||220-240V ~/50Hz|
|5||Filtration area||20 m2|
|6||Number of filter cartridges||1 piece|
|7||Filter medium||Synthetic wood pulp fiber filter paper|
|10||Ash hopper volume||2 L|
|11||One suction arm||Ø160mm*2m|
|12||Weight (excluding suction arm)||98±5KG|
|13||Dimensions(excluding suction arm)||510×610×990mm|