|Voltage:||220-240V 50 Hz||Air Flow:||1000m3/h|
|Filter Precision:||0.1 Or 0.5μm||Suction Arms:||2m, DN160, Plastic Or Stainless Steel Hood|
|Cleaning Way:||Semi-automatically Cleaning Or Manual Handing||Weight:||98 Kgs|
welding smoke eater,
industrial dust extractor
Economical mobile welding fume extractor with 2m arms & stainless steel hood and suiting TIG & MIG welding fume disposal
1. Mobile welding fume extractor has two directional and two rotary polyurethane casters with brake
device for easy moving and stationing. It is suitable for the purification of fume and dust generated
in all kinds of welding, grinding and other places as well as for collecting rare metal particles and
2. Suction arm can be rotated by 360 °and can reach the position flexibly and easily by pulling the
handle on the hood and position in the absence of external force. Depending on needs, 2m, 3m
flexible suction arm are available.Suction arm uses high temperature resistant, flame retardant
and wearable composite material, it will not crack after burning through by spark and has a longer
usage life. The diameter of suction arm is 160mm.
3. The fume comes from the processing will be sucked into the extractor through the hood, first the fume
passes the 1st layer preventer plate which will ramify the fume to avoid residual sparks enter into filter
layer directly. Finally, the fume enters the second layer of HEPA filter cartridge for ultimate purification,
and HEPA’s filtration efficiency can reach 99.9%. As the filtering precision of the main filter cartridge
reaches the indoor emission standard, the filtered clean air can be directly discharged indoor via the
vent in the bottom of the extractor.
4. The filter cartridge of the welding fume extractor is made of imported filtering material of high
filtration precision and can filter out welding fume of 0.5μm. According to the extractor’s work intensity
and the amount of dusts, the usage life of the filter cartridge is different.
1. CE certification and EMC test report is approvable.
2. Specically suiting for TIG,MIG etc. small fume volume working conditions.
3. Small dimension, easy to move, low power and energy consumption,low price.
4. It's able to change PTFE membrane filter cartridge to get better filtering precision.
5. Gas-pressue meter from USA, Switzerland switch ( Water proof, dust proof and short-circuit protection)
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||1000±100 m3/h|
|4||Power supply||220-240V ~/50Hz|
|5||Filtration area||20 m2|
|6||Number of filter cartridges||1 piece|
|7||Filter medium||Synthetic wood pulp fiber filter paper|
|10||Ash hopper volume||2 L|
|11||One suction arm||Ø160mm*2m|
|12||Weight (excluding suction arm)||98±5KG|
|13||Dimensions(excluding suction arm)||510×610×990mm|
Contact Person: Jason