Air Flow Of 2800 M3/H And Arm Of Φ200mm Welding Fume Extractor, 3 KW Power Weld Smoke Collector
Separation: Dust laden fume are sucked into the extractor by the suction force induced by fan’s working, with deflector fume’s flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filter
cartridge. The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge’s interior and then discharged into workshop directly or out of the workshop through pipe line.
Cleaning: When dusts accumulate continuously on filter cartridge’s surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge’s surface, dusts fall into dust collector under gravity, thus the whole cartridge’s surface is cleaned.
This extractor can be automatically cleaned and manually cleaned, automatically cleaning is as following.
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation
pulse blow cleaning.
2. When the fan stops working, the system will implement rotation pulse blow cleaning for three times.
1. Export many years, professional factory.
2. 24 months warranty besides filter cartridge.
3. CE certification and EMC test report is approvable.
4. Application for large fume occasion, the force of sucking is large.
5. Large air flow is adjustable through the air flow valve on the suction hood.
6. We are one of the best brands in this filed in China, it will replace many famous brands products from Europe and USA.
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||2800±100 m3/h|
|3||Motor power||3 kW|
|4||Power supply||3×380 or 415V/50Hz|
|6||Number of cartridge filters||2 pieces|
|7||Filter medium||PTFE coated filter element|
|9||Solenoid valve||2 pieces|
|10||Compressed air||5～6 bar|
|11||Ash hopper volume||15L|
|14||Dimensions(excluding suction arm)||800(L)×800(W)×1633(H)mm|