|
Product Details:
|
| Power: | 1.0KW | Vacuum Pressure Arrange: | 16000Pa-25000Pa |
|---|---|---|---|
| Air Flow: | 180mm³/h | Voltage: | 380V 50Hz |
| Suction Hose: | DN 44 | Cleaning Way: | Changing Filter |
| Noise: | ≤72±5Db | Filtering Area: | 8 M2 |
| High Light: | welding smoke extractor,portable smoke eaters |
||
Small size portable vacuum fume eliminator
Product introduction
Low noise levels, KSG-1.0 B of noise reduction, through the vent installed smart noise reduction device was significantly weaken the noise effect, and this does not affect the cooling fan.
Ingenious design of the KSG-1.0B, when welding, it opens automatically by the automatic start/stop switch. With compressive strength of synthetic ingredients, KSG-1.0 B can use conveniently. In a small limited space or difficult to achieve welding point, it is easy to operate and use with standard truckle.
With long-lasting H filtering technology, the unique long-term H filter area is no less than 8 square meters. There is no need to do frequent cleaning, so its service life is long and has continued high efficiency. Excluded from the welding smoke and dust precipitation with filter processing, so there is no dust be released.
Four stages filtering system, when welding dust into the equipment first by a metal filter, then the smoke through the first filter made by aluminum, H main filter and an optional activated carbon filter, finally through a HEPA filter, so in any case it can assure 99.9% filtration efficiency.
Powerful small fan, the fan can guarantee under the condition of all have enough ability to extract smoke. When low smoke concentration, the fan can be in half speed operation, extraction ability is also in half. It has the advantages: to make the fan has a constant power load, low noise level and reduce maintenance. Dynamic cooling system makes the KSG-.0 B sustainable use with longer life.
Main features
1. It is suitable for the welding occassion of frequently changing.
2. DN44 mm hose is available, it is easy to move and install in the process of using.
3. High efficiency vacuum pressure fan makes sure the usage life and suction force & air flow.
4. The structure of design is reasonable, the size is small and low noise with large suction force .
Technical parameters
| No. | Item | Parameter |
| 1 | Fan type | Vacuum fan |
| 2 | Treatment of air flow | 180±10 m3/h |
| 3 | Motor power | 1.0 kW |
| 4 | Power supply | 220 V/50Hz |
| 5 | Filtration area | 8 m2 |
| 6 | Cleaning way | Changing filter |
| 7 | Maximum vacuum pressure | 16000-25000 Pa |
| 8 | Cartridge filter | 3 pcs (HEPA) |
| 9 | Filter medium | Polyester PTFE membrane |
| 10 | Filtration efficiency | >99.9% |
| 13 | Suction hose diameter | One DN44mm |
| 14 | Noise | ≤72±5dB(A) |
| 15 | Weight | 45±5kg |
| 16 | Dimensions | 400(L)×400(W)×880(H)mm |
Contact Person: Jason
Tel: +86-21-57783800-8013
Fax: +86-21-57783801
