Product Details:
|
Model: | KSG-5.5A | Condition: | New |
---|---|---|---|
Air Flow: | 700±10m³/h | Power: | 5.5 KW |
Suction Hose: | 3 Pcs,5 Or 10m Length,DN 44mm | Filter Cartridge: | 2 PCS |
Compressed Air: | 0.5~0.6MPa | Dimension(l*w*h): | 700*700*1850 Mm |
Weight: | 295 ±10kgs | Warranty: | 2 Years |
After-sales Service Provided: | Online Support,Free Parts | ||
High Light: | Mobile Fume Extraction Units 5.5kw,High Negative Vacuum Fume Extractor,Mobile Vacuum Fume Extractor |
High Vacuum Dust And Fume Extraction Equipment With Automatic Cleaning
Smoke Absorber Product Introduction
Welding fume and dust collector is a small dust collector specially designed for small particles that harmful to human body produced during welding. It is suitable for single and double welding positions. It is light, flexible and easy to operate.
Technical parameters
No. | Model | KSG-5.5A | KSG-3.4A |
1 | Treatment of air flow | 700±10m3/h | 450±10m3/h |
2 | Motor Power | 5.5Kw | 3.4kW |
3 | Voltage | 380 V/50 Hz | 380 V/50 Hz |
4 | Filter Material | Polyester+PTFE | Polyester+PTFE |
5 | Filtering area | 20m2 | 20m2 |
6 | Cleaning Methods | Automatic Cleaning | Automatic Cleaning |
7 | Compressed Air | 0.5-0.6MPa | 0.5-0.6MPa |
8 | Filtration efficiency | >99.9% | >99.9% |
9 | Filtering Precision | ≥0.3um | ≥0.3um |
10 | Noise | ≤72±5dB(A) | ≤72±5dB(A) |
11 | Dimension | 700×700×1850 mm | 700×700×1850 mm |
12 | Weight | 295±10Kg | 265±10Kg |
Working principle
The high-pressure fan will generate a strong vacuum suction force, forcing the fume to move to the air inlet and enter the extractor for purification. While the wire mesh filter filters out sparks, the fume is evenly divided by the deflector, and then filtered by the filter cartridge. At the same time, the large particles fall into the dust collector/fume extractor under the action of gravity, while the small particles float in the vortex caused by suction and be filtered by the extractor. Small particles coalesce on the layer surface of the filter cartridge, and then fall into the dust box under the action of gravity. The purified air is discharged into the workshop through the air outlet.
Features
1. The air purifier applies to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals,precious materials, etc
2. For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make it a longer life, more secure and reliable.
3. Intelligent model using PLC automatic control makes operation easy, filter rotates with the use of full-automatic cleaning in all directions, so that there is a more thorough cleaning filter surface, always to guarantee a constant air volume absorption. Filter is made of imported microporous PTFE film ,and can filter out welding fume of 0.1μm filtering with high precision can meet GB indoor emission standards. And can filter out welding fume of 0.1μm
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection measures when too high temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage for sparks but longer life.
6. Photoelectric switch, efficient and energy-saving, with lighting fixtures cantilever cover (optional).
7. The plasma and laser cutting fume extractor averagely divides the cutting platform into partitions of equal width , a dust collector for both fume absorption and dust holding is configured in each partition. The valve is set at the end of each partition, and is in linkage with the pneumatic tappet. When the cutting gun arrives any position, the corresponding valve automatically opens, and always ensures that ventilation is just implemented only in the cutting areas that generate fume. This system greatly reduces the amount of wind needed, thus saves the consumption of electric energy.
Package & Shipping
Package: Package Used Wooden Box without Fumigation
The package would include spare parts box and machine installation tools.
Transportation By Sea or By Air are both Acceptable.
Contact Person: Betty
Tel: +8615103284290