Air Flow Of 2800 M3/H And Arm Of Φ200mm Welding Fume Extractor, 3 KW Power Weld Smoke Collector
Cleaning: When dusts accumulate continuously on filter cartridge’s surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge’s surface, dusts fall into dust collector under gravity, thus the whole cartridge’s surface is cleaned.
This extractor can be automatically cleaned and manually cleaned, automatically cleaning is as following.
1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation
pulse blow cleaning.
2. When the fan stops working, the system will implement rotation pulse blow cleaning for three times.
1. Export many years, professional factory.
2. 24 months warranty besides filter cartridge.
3. CE certification and EMC test report is approvable.
4. Application for large fume occasion, the force of sucking is large.
5. Large air flow is adjustable through the air flow valve on the suction hood.
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||2800±100 m3/h|
|3||Motor power||3 kW|
|4||Power supply||3x380V/50Hz or 3*220V/60 Hz|
|6||Number of cartridge filters||2 pieces|
|9||Solenoid valve||2 pieces|
|11||Ash hopper volume||15L|
|14||Dimensions(excluding suction arm)||800(L)×800(W)×1633(H)mm|