|Moter Power:||1.5kW||Working Voltage:||380V/50HZ/3PH|
|Filtering Material:||Polyester+PTFE||Fan Air Flow:||3000±100m³/h|
|Air Flow Of Treatment:||1500m³/h||Compressed Air:||0.5~0.6 Mpa|
|Filtering Area:||10㎡||Filtering Efficiency:||＞99.9%|
|Filtering Precision:||≥0.1μm||Noise Level:||≤72±5dB（A）|
mobile fume extraction units,
mobile welding fume extractor
Mobile Intelligent Welding Fume Extractor
The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer preventer plate which will ramify the fume to avoid residual sparks enter into filter layer directly. Finally, the fume enters the second layer of HEPA filter cartridge for ultimate purification, and HEPA' s filtration efficiency can reach 99.9%. As the filtering precision of the main filter cartridge reaches the indoor emission standard, the filtered clean air can be directly discharged indoor via the vent in the bottom of the extractor.
Incorporated world leading environmental technology, economical mobile fume extractor is a technically advanced industrial dust & fume extractor, it's developed with full consideration of the forming, characteristics and harm of fumes and based on actual conditions of cutting and welding workshop.
1. Suction arm can be rotated 360° horizontally, according to actual working condition, suction volume can be adjusted by adjusting volume valve in suction hood.
2. This product adopted world leading imported material of wood fiber filtering, for dust (above 0.3μm) filtration efficiency reaches 99.9%, meanwhile maintain a high air flow. It is ideal for purifying dry, oil-free, non-corrosive fume mixture generated in cutting and welding, collecting rare metals and valuable materials.
3. Depending on needs, 2m, 3m flexible suction arm are available.
|1||fan type||centrifugal fan|
|2||treatment of air flow||3000±100 m3/h|
|3||motor power||1.5 kW|
|6||number of cartridge filters||1 piece|
|7||filter medium||PTFE coated filter element|
|9||solenoid valve||1 piece|
|10||compressed air||5~6 bar|
|11||ash hopper volume||15L|
|14||Dimensions(excluding suction arm)||800(L)×700(W)×1600(H)mm|
Contact Person: Louis