|Product Name:||Fume Filtration Unit||Color:||Customized|
|Motor Power:||1.1kW||Working Voltage:||1x220V/50Hz|
|Noise Level:||≤68±5dB(A)||Cleaning Way:||Discharging The Filter To Clean|
portable welding fume extractor,
welding smoke eater
HEPA And Active Carbon Filter Brazing Smoke Collector, Fume Extractor
Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious materials, etc.
There are 3 stages filtering layer with the interception net. It will also increase the active carbon filter layer according to working conditions or clients, the filtering effeciency is very high, the active carbon filtering layer will reduce the peculiar smell in the air.
With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage to sparks, its life shorter than the model of intelligent.
Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by pulling the handle of the hood with the operator’s will flexibly and easily and position by itself in the absence of external force.
Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will not crack after burning through by spark with longer life; the arm diameter is160mm.
|1||Fan type||Centrifugal fan|
|2||Treatment of air flow||1300±50 m3/h|
|3||Motor power||1.1 kW|
|4||Power supply||220V ~/50Hz|
|5||Initial efficiency filter||1 pc 1㎡|
|6||Medium efficiency filter||1 pc 7㎡|
|7||High efficiency filter||1 pc 7㎡|
|8||Total filtration area||15 m2|
|9||Filter medium||Synthetic wood pulp fiber filter paper +membrane|
|10||Cleaning method||Discharging the filter to clean|
|12||Air pressure||1900 Pa|
|13||One suction arm||Ø160mm*2m|
|14||Weight (excluding suction arm)||138±5KG|
|15||Dimensions(excluding suction arm)||660×750×1200mm|
Contact Person: Jason