|Voltage:||415V 50 Hz||Air Flow:||2600m³/h|
|Fillering Precision:||Polyester Filter, 0.1 μm||Filtering Area:||20 ㎡|
|Suction Arm:||3m,φ160mm， 2 Pcs Arm||Noise:||≤74±5 Db|
|Filter Qty:||2 Pcs Filter Cartridge||Dimension:||800x800x1633mm|
mobile fume extraction units,
mobile welding fume extractor
Exporting To Europe And Australia Market Two Arms & Filters Smart Fume Exhauster With Air Flow Of 2600 m³/h
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||2600±100 m3/h|
|3||Motor power||3 kW|
|4||Power supply||3×380 or 415V/50Hz|
|6||Number of cartridge filters||2 pieces|
|7||Filter medium||PTFE coated filter element|
|9||Solenoid valve||2 pieces|
|10||Compressed air||5～6 bar|
|11||Ash hopper volume||15L|
|14||Dimensions(excluding suction arm)||800(L)×800(W)×1633(H)mm
Smart mobile welding fume extractor has two directional and two rotary polyurethane casters with brake device for easy moving and stationing. It is suitable for the purification of fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material.
Suction arm can be rotated by 360 °and can reach the position flexibly and easily by pulling the handle on the hood and position in the absence of external force. Depending on needs, 2m, 3m or 4m flexible suction arms are available. Suction arm uses high temperature resistant, flame retardant and wearable composite material, it will not crack after burning through by spark and has a longer usage life. The diameter of suction arm is 160mm.
The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer spark intercept steel mesh which will separate and intercept the spark initially. And the fume enters into second layer namely filter preventer plate to avoid residual sparks enter into main filter layer directly through ramifying the fume. At last the fume enters the third layer namely the main filter cartridge for ultimate purification.The filtration efficiency can reach 99.9%.
The filter elment of the welding fume extractor is made of imported PTFE membrane filter material of high filtration precision, and the filtration precision reaches 0.1 μm. In accordance with the extractor work intensity and the amount of dust, the usage life of the filter is different.The corresponding indicator on the control panel will light up to indicate different conditions and a power phase sequence indicator, phase absence and short-circuit protection are set inside. It’s equipped with automatic shutdown mechanism when the temperature is too high (optional)
Contact Person: Jason