Mobile welding fume extractor customized active carbon filter
1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals,
precious materials, etc.
2. For the KSJ-0.7B model purifier, its electric control is simple, automatically cleaning relying on
the internal pressure sensors, and also can by manual. There are 3 stages filtering layer with the
interception net. It will also increase the active carbon filter layer according to working conditions or
clients, the filtering effeciency is very high, the active carbon filtering layer will reduce the peculiar smell
in the air.
3. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature,
wear-resistant compounded materials, without crack and damage to sparks, its life shorter than the
model of intelligent.
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection
measures when too high temperature.
5. Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air
by pulling the handle of the hood with the operator’s will flexibly and easily and position by itself in the
absence of external force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.
6.The filter elment of the welding fume extractor is made of imported filter material of high filtration
precision, and the filtration precision reaches 0.3 μm. In accordance with the extractor work intensity
and the amount of dust, the usage life of the filter is different. On the control panel, it includes:
-Pressure difference indicator
|1||Fan type||Centrifugal fan|
|2||Treatment of air flow||1300±50 m3/h|
|3||Motor power||1.1 kW|
|4||Power supply||220V ~/50Hz|
|5||Initial efficiency filter||1 pc 1㎡|
|6||Medium efficiency filter||1 pc 7㎡|
|7||High efficiency filter||1 pc 7㎡|
|8||Total filtration area||15 m2|
|9||Filter medium||Synthetic wood pulp fiber filter paper +membrane|
|10||Cleaning method||Discharging the filter to clean|
|12||Air pressure||1900 Pa|
|13||One suction arm||Ø160mm*2m|
|14||Weight (excluding suction arm)||138±5KG|
|15||Dimensions(excluding suction arm)||660×750×1200mm|