Shanghai Kaisen Environmental Technology Co., Ltd. +86-21-57783800-8013 kspurify@outlook.com
Split Up Type Central Dust Collector With Cyclone Separator Large Air Flow

Split Up Type Central Dust Collector With Cyclone Separator Large Air Flow

  • High Light

    industrial dust collection system

    ,

    central dust collection system

  • Color
    Blue + White
  • Power
    15KW
  • Voltage
    380V Or 415V
  • Air Flow
    12000 M³/h
  • Filter Area
    135 ㎡
  • Filter Material
    PTFE Membrane Imported , 0.1 μm
  • Place of Origin
    SHANGHAI
  • Brand Name
    KAISEN
  • Certification
    CE
  • Model Number
    KSFC-8609
  • Minimum Order Quantity
    1 Set
  • Price
    Negotiation
  • Packaging Details
    wooden box
  • Delivery Time
    25 work days
  • Supply Ability
    100 sets per month

Split Up Type Central Dust Collector With Cyclone Separator Large Air Flow

Split up type central fume extractor system with cyclone separator, large air flow

 

Working principle

The vacuum pressure air flowing the blower generates enters the purifying chamber through the suction arm or pipe. The dust contained gas is purified in the purifying chamber through the separation of the filter cartridge. Through different ways of cleaning (manual cleaning or automatic cleaning) make the ash cake of accumulating in the surface of the filter fall into the fume drum. After cleaning, the clean air through the air duct is exhausted out by blower (exhaust gas containing dust standard ≤ 1.2 mg/m³)

 

 

Product introduction

  1. Split type central dust collector with large airflow is not suitable for the collector integration of design due to the fan and moter measurement is larger.Therefroe we use the design of split type. Seperated the fan and motor sound proof box with silencer makes the noise decline greatly. Inside the dust collector adopts multiple fire-proof steps,to make sure that it is more safe and reliable in the processing of operating.
  2. Split Type Central Control system implements real-time monitoring and analysis on a number of important parameter of equipments in the operation and show them in the display, and it has self-diagnosis function, showing abnormal and error conditions in the operation of the equipment automatically.The central dust & fume purification system' s performance is controlled by PLC controlling system.
  3. Split Type Central fume&dust purifier is a series product researched, developed and designed bythe company based on the requirements of different site conditions.The structure of split type units is designed to large and reasonable. A complete series of specifications has been developed tomeet the on-site different work-in-conditions, whether large-scale welding or grinding shop, or weldingcenters, robotic welding production lines, plasma, or laser cutting blanking production lines, you can findsuitable product model.
  4. The functionality of a filter lies in the filter element' s material, Kaisen's filter element is speciallydeveloped for the purification of fume and fine particles generated in welding and cutting, solved this industry's problem of low filtration precision and filter element's blocking. And the outer surface of the cartridge is covered by a layer of PTFE film layer through heat treatment a special process.Cartridge wall is thin in structure and has high strength, and the surface film layer has a very uniform pores, making a network structure with a bore diameter of 0.1 microns below.
  5. Rotary dust blowing device is inserted inside the filter cartridge, and very close to the cartridge's inner wall.When the solenoid valve opens, compressed air enter into two pipes drilled with nozzles, implementing rotary blowing to clean every part of the filter cartridge. Compared with externally placed blowing nozzles, rotary dust blowing "nozzles" blow force is even on every part of the cartridge, and have a thorough cleaning, avoid big noise and damage to the cartridge caused by instant huge blow impact of the externally placed blowing method.
  6. To the position polluted by a little oil mist, the company's special spray device not only dilutes oil mistand prevents the dust from attaching to the filter surface to reduce its service life, but also plays a role in fire prevention.
  7. We can customize to design the device of dust caputuring according to the workpieces size, shape, welding position,welding craft, welding fume nature, and on-site environment etc integrated factor. Also we provide the common mass production kinds of suction arm, suction nozzle,suctin welding cap, suction welding guns etc. Meanwhile, to point some special requirement of work units, we also design the different size welding house, manual/air/electric suction hood and the other types fume captureing device

 

 

Main features

  1. CE certification is available. 
  2. Application for 9-12 welding units fume disposal, medium or big plasma cutting fume disposal and robot welding housing fume disposal and so on.
  3. Large air flow, automatically cleaning, maintaining easy, preprocessor to intercept the spark, filter quickly installation design. 
  4. Good parts make sure the qualilty, for example, Schneider,CHNT electrics, Siemens PLC and montoring screen, USA gas-pressure switch, Japan Toray filtering material, AKZO Nobel spraying powder etc.
  5. Exellent housing and structure design makes sure the machine is durable.

 

 

Technical parameters

No. Item Parameter
1 Fan type centrifugal fan
2 Treatment of air flow 12000±100 m3/h
3 Motor power 15 kW
4 Power supply 3×380 or 415V/50Hz
5 Filtration area 135m2
6 Number of cartridge filters 9 pieces
7 Filter medium PTFE coated filter element
8 Filtration efficiency >99.9%
9 Solenoid valve 9 pieces
10 Compressed air 5~6 bar
11 Ash hopper volume 50L
12 Noise ≤75±5dB(A)
13 Weight 950±20kg (Not fan)
14 Dimensions(excluding suction arm)

 

1620(L)×1500(W)×2300(H)mm (Not fan)