Incorporating world leading environmental technology Kaisen mobile fume extractor is a technically advanced industrial dust & fume extractor, it’s developed with full understanding of the characteristics and potential risks associated with fume and airborne dust in the working environment and designed with flexibility to serve the actual process of cutting and welding within a workshop.
Fitted with a cellulose filter cartridge offering 99% efficiency for dust (above 0.1μm) while maintaining air flow it is ideal for controlling the fume generated in cutting and welding operations. The KSZ series mobile fume extractor delivers class beating airflow and filtration.
Separation: dust laden fume are sucked into the extractor by the suction force induced by fan’s working, with deflector fume’s flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filter cartridge. The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge’s interior and then discharged into workshop directly or out of the workshop through pipe line.
Cleaning: when dusts accumulate continuously on filter cartridge’s surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge’s surface, dusts fall into dust collector under gravity, thus the whole cartridge’s surface is cleaned.
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||2600±100 m3/h|
|3||Motor power||3 kW|
|4||Power supply||3×380 /50Hz|
|5||Filtration area||20 m2|
|6||Number of cartridge filters||2 piece|
|7||Filter medium||PTFE coated filter element|
|9||Solenoid valve||2 piece|
|10||Compressed air||5～6 bar|
|11||Ash hopper volume||15L|
|14||Dimensions(excluding suction arm)||800(L)×800(W)×1633(H)mm|