Shanghai Kaisen Environmental Technology Co., Ltd. +86-21-57783800-8013 kspurify@outlook.com
Flame Retardant 2600m3/H Robot Welding Fume Extractor

Flame Retardant 2600m3/H Robot Welding Fume Extractor

  • High Light

    Robot Welding Fume Extractor

    ,

    2600m3/H Welding Fume Extractor

    ,

    Flame Retardant Welding Fume Extractor

  • Power
    3 KW
  • Voltage
    3x380V -415V 50 Hz
  • Air Flow
    2600m³/h
  • Filtering Area
    20 ㎡, 2 Pcs Filter Cartridge
  • Filtering Efficiency
    99.99%
  • Suction Arm
    3m,φ160mm, 2 Pcs Arm
  • Noise
    ≤74±5 Db
  • Demension
    800x800x1663mm
  • Place of Origin
    Shanghai
  • Brand Name
    KAISEN
  • Certification
    CE
  • Model Number
    KSZ-3.0D
  • Minimum Order Quantity
    2 sets
  • Price
    Negotiation
  • Packaging Details
    wooden box, 1010*1020*1890mm excluding arms,
  • Delivery Time
    30 days
  • Payment Terms
    L/C, T/T, Western Union
  • Supply Ability
    200 Sets per month

Flame Retardant 2600m3/H Robot Welding Fume Extractor

Large Air Flow Robot Metal Welding Fume Extraction


Working principle


Separation: dust laden fume are sucked into the extractor by the suction force induced by fan’s working, with deflector fume’s flowing speed is slowed, big practical and sparks are cooled, separated and then settle into dust collector. Fine fume and dust enter into filter compartment to be filtered by the filter cartridge. The filter cartridge is coated with PTFE film which is covered with uniform pores, it has good air permeability, and dusts are filtered out on its surface. Purified air enters into the filter cartridge’s interior and then discharged into workshop directly or out of the workshop through pipe line.


Cleaning: when dusts accumulate continuously on filter cartridge’s surface, the pressure difference between its interior and exterior will increase steadily, when the pressure difference reach pre-set value(1500Pa), the pulse valve will open, dry, oil-free compressed air rush into the reverse blow cleaning system. The system rotate and high pressure air stream jet at the interior of filter cartridge, blow off dusts accumulated on the filter cartridge’s surface, dusts fall into dust collector under gravity, thus the whole cartridge’s surface is cleaned.


This extractor can be automatically cleaned and manually cleaned, automatically cleaning is as following:


1. When air pressure difference reach 1500Pa between the interior and exterior of the filter cartridge, the system will implement interval rotation        pulse blow cleaning.


2. When the fan stops working, the system will implement rotation pulse blow cleaning for three times.
 
Product introduction


Smart mobile welding fume extractor has two directional and two rotary polyurethane casters with brake device for easy moving and stationing. It is suitable for the purification of fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal particles and precious material.


Suction arm can be rotated by 360 °and can reach the position flexibly and easily by pulling the handle on the hood and position in the absence of external force. Depending on needs, 3m or 4m flexible suction arms are available. Suction arm uses high temperature resistant, flame retardant and wearable composite material, it will not crack after burning through by spark and has a longer usage life. The diameter of suction arm is 160mm.


The fume comes from the processing will be sucked into the extractor through the hood, first the fume passes the 1st layer spark intercept steel mesh which will separate and intercept the spark initially. And the fume enters into second layer namely filter preventer plate to avoid residual sparks enter into main filter layer directly through ramifying the fume. At last the fume enters the third layer namely the main filter cartridge for ultimate purification.The filtration efficiency can reach 99.9%.


As the filtering precision of the main filter cartridge reach the indoor emission standards, after filtration clean air can be directly discharged indoor through the air vent in the back of the extractor. The filter inside makes use of full automatically rotating blowing (pulse nuzzle cleaning) system for cleaning ash while connecting the compressed air source, it makes the surface of filter more clean and tidy. So the dust collector is always keeping the constant air flow.

 
Technical parameters 

 

 No.

Item Parameter
1 Fan type centrifugal fan
2 Treatment of air flow 2600±100 m3/h
3 Motor power 3 kW
4 Power supply 3×380 or 415V/50Hz
5 Filtration area 20m2
6 Number of cartridge filters 2 pieces
7 Filter medium PTFE coated filter element
8 Filtration efficiency >99.9%
9 Solenoid valve 2 pieces
10 Compressed air 5~6 bar
11 Ash hopper volume 15L
12 Noise ≤74±5dB(A)
13 Weight 266±10kg
14 Dimensions(excluding suction arm) 800(L)×800(W)×1633(H)mm

 

Flame Retardant 2600m3/H Robot Welding Fume Extractor 0

Flame Retardant 2600m3/H Robot Welding Fume Extractor 1Flame Retardant 2600m3/H Robot Welding Fume Extractor 2Flame Retardant 2600m3/H Robot Welding Fume Extractor 3