1.1kw 115V~220V 50/60Hz Brass Brazing Fume and Smoke Collector Eliminator
Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious materials, etc.
For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make it a longer life,more secure and reliable.
There are 3 stages filtering layer with the interception net. It will also increase the active carbon filter layer according to working conditions or clients, the filtering effeciency is very high, the active carbon filtering layer will reduce the peculiar smell in the air.
With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage to sparks, its life shorter than the model of intelligent.
Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by pulling the handle of the hood with the operator’s will flexibly and easily and position by itself in the absence of external force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.
Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will not crack after burning through by spark with longer life; the arm diameter is160mm.
|1||Fan type||Centrifugal fan|
|2||Treatment of air flow||1300±50 m3/h|
|3||Motor power||1.1 kW|
|4||Power supply||220V ~/50Hz 115V 60Hz|
|5||Initial efficiency filter||1 pc 1㎡|
|6||Medium efficiency filter||1 pc 7㎡|
|7||High efficiency filter||1 pc 7㎡|
|8||Total filtration area||15 m2|
|9||Filter medium||Cellulose, active carbon, glass fiber|
|12||Air pressure||1900 Pa|
|13||One suction arm||Ø160mm*2m|
|14||Weight (excluding suction arm)||138±5KG|
|15||Dimensions(excluding suction arm)||660×750×1200mm|