Portable Fume Extractor For Metal Welding Soldering Fume Extractor 1000m3/H Air Volume
The basic Stage Filtration Process about the welding fume extractor
Stage 1: Air passes trhough the pre-filter fire-proof net.
Stage 2: Air passes through a second pre-separator to further reduce medium to heavy particulate matter.
Stage 3: Air passes through the Long Life filter where welding fume particles are captured and deposited.
Stage 4: Activated carbon filter will help prevent or neutralize the release of odors back into the environment.
|1||Fan type||centrifugal fan|
|2||Treatment of air flow||1000m3/h|
|4||Power supply||220-240V ~/50Hz|
|5||Filtration area||20 m2|
|6||Number of filter cartridges||1 piece|
|7||Filter medium||Synthetic wood pulp fiber filter paper|
|10||Ash hopper volume||2 L|
|11||One suction arm||Ø160mm*2m|
|12||Weight (excluding suction arm)||98±5KG|
|13||Dimensions(excluding suction arm)||510×610×990mm
1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious materials, etc.
2. For the potential of fire and molten slag particles, two protective measures are used inside purifier, to make it a longer life, more secure and reliable.
3. For the KSJ-0.7S semi-automatic model purifier, its electric control is simple, automatically cleaning relying on the internal pressure sensors, and also can by manual. Filter rotates with the use of semi-automatic cleaning in all directions, so that there is a more thorough cleaning filter surface, to guarantee a constant air volume absorption.Filter is made of imported microporous PTFE film , filtering with high precision can meet GB indoor emission standards.
4. Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will not crack after burning through by spark with longer life; the arm diameter is160mm.
Fume generated in working will be sucked into the extractor through the hood, first through the fire resistance net, large particles and sparks produced in grinding is intercepted and separated. Then enter fume directing layer, the deflector to ramify the fume to avoid residual spark into the main filter cartridge directly . At last the fume enters the third layer the main filter cartridge for ultimate purification, and it's filtration efficiency can reach 99.9% . As the filtering precision of the main filter cartridge reach the indoor emission standards, after filtration clean air can be directly discharged indoor through the air vent in the bottom fo the extractor.
On the control panel, it displays.
Package & Shipping