Laser marking fume purifier with one arm
1. Built-in way to avoid indoor air filtration cycle air conditioning / heating discharged to outside.
2. Integrated design, convenient installation, flexible move, no pipes needed.
3. High-power brushless motor, long life, low noise, a high air flow.
4. Multi-position design, air flow Adjustable, flexible suction arms adjust freely.Application for position of
iron welding,soldering oven, wave soldering, reflow oven. Laser welding, engraving, marking, cutting.
5. There are three layers filters including the active carbon filter layer inside of the soldering fume
extractor to ensure a higher filtering efficiency, powerful deodorizing, longevity of filter materials and
lower maintenance cost. It has multi-site design and air flow is adjustable. The flexible suction arm can
be adjusted freely and reach any position the operator wants it to reach.
When dust-laden air sucked into the machine through suction arm, big particles are filtered out by the first layer of fold wave filter, preventing particles hitting & damaging high efficiency filter cartridge; then it continues to pass through the high efficiency filter cartridge under the suction force of fan and particles are separated; at last impurity are absorbed on activated carbon. Filtered air can be discharged directly to the workshop through the vent.
|1||Motor type||Centrifuged fan|
|4||Voltage & frequency||220V/50Hz|
|6||Filter layer||3 layers|
|7||Filtering material||Glass fabric, active carbon|
|8||Filtering efficiency||0.5um ,>95%|
|10||Suction arm||1 pc 1.2m φ75mm|
|11||Suction hood (optional)||φ355 mm ,Acrylic material|