|
Product Details:
|
| Treatment Of Air Flow: | 1000±100 M³/h | Motor Power: | 0.75 KW |
|---|---|---|---|
| Power Supply: | 220V/50Hz | Filtration Efficiency: | >99.9% |
| Noise: | ≤74±5dB(A) | Weight: | 98±5kg |
| Dimensions(excluding Suction Arm): | 510(L)×610(W)×990(H)mm | ||
| High Light: | 0.75Kw Industrial Fume Extractor,Welding Industrial Fume Extractor,1000m³/h Welding Fume Extractor |
||
ODM/OEM service is available.
Working Principle
The fume will be sucked into the extractor through the exhaust hose. Firstly, the fume passes the diversion device which could ramify the fume to avoid residual sparks enter into the filter layer directly. Then, 99.99% of the welding fumes & smoke generated from hthe welding processes will be removed by the filter effectively. As the exhausted air could reach the indoor emission standard, the filtered clean air can be directly discharged indoor via the vent in the bottom of the extractor.
when the pressure reaches the specified value, you need to connect the machine to a compressed air by air inlet to clean the filter. Or you can also take out of filters from the front door, and clean it by using compressed air gun.
Product introduction
fume extractor is suitable for manual welding and small workpiece welding. It also uses in simple laser welding, engraving and new material processing, ect. It is very flexible using in most working area, especially when the work position is very dispersive.
Our welding fume extractors are permanent or portable, cost efficient, easy to integrate and reliable with a 2 year warranty.
1. Adopts high quality cold-rolled steel plate processing, key structural parts made by laser cutting and one shot punching forming.
2. Reasonable box structure, compact and practical.
3. A diversion device at the inlet to protect the filter from the damage of large particles.
4. Filter adopts the high efficiency import PTFE coated polyester fiber, the filtration reach 99.9%.
5. Four casters at the bottom, two of them with active belt brakes, easy to move and fix position.
Standard Parameters
| No. | Item | Parameter |
| 1 | Fan type | centrifugal fan |
| 2 | Treatment of air flow | 1000±100 m3/h |
| 3 | Motor power | 0.75kW |
| 4 | Power supply | 220-240V ~/50Hz |
| 5 | Filtration area | 20 m2 |
| 6 | Number of filter cartridges | 1 piece |
| 7 | Filter medium | Synthetic wood pulp fiber filter paper |
| 8 | Filtration efficiency | >99.9% |
| 9 | Noise | ≤74±5dB(A) |
| 10 | Ash hopper volume | 2 L |
| 11 | One suction arm | Ø160mm*2m |
| 12 | Weight (excluding suction arm) | 98±5KG |
| 13 | Dimensions(excluding suction arm) | 510×610×990mm |
Company profile
Contact Person: Jason
Tel: +86-21-57783800-8013
Fax: +86-21-57783801
